系統設定
手動模式
自動平衡模式
定位模式
關閉
啟動回航點
你也可以接一至兩組衛星天線來取代標準接收機，此時六通道連接線已不需使用。
遙控器的設定除了前四個為標準搖桿指令其它三組請設在開關或旋鈕，最後再以燈號確認指令是否正確。
*執行對頻前請先將對頻線插入GU-INS的AIL插槽。
若以JR遙控器DSX7、DSX9為例：
GEAR
FLAP
AUX2
回航點
模式切換
雲台上下軸
(為了安全，請先將螺旋槳移除)
接下來確認模式切換開關，請注意開關位置所代表的飛行模式(燈號如左上圖)及回航點的開關位置
(燈號如右上圖)
System Setting
Manual mode
Auto-balance mode
GPS positioning mode
Off
“Home” function
6.Then confirm the LED light of “MODE” and “GPS” in each fly mode; pay attention to the functionality of each
switch position (as illustrated).
You can also connect 1~2 satellite receiver instead of standard receiver, 6 channel connection cable is
unnecessary while using satellite receiver. While setting the transmitter, please assign the functions
(Home, Mode, etc) to the 2 or 3 positions switch and levers, and confirm again how it works according
to the status of the LED lights.
Ex: channel assignment for
JR DSX7 and DSX9:
Home function
Fly mode
Camera gimbal
Insert the “Bind plug” to the “AIL” slot
before binding the transmitter
and GU-INS
(For your safety, please remove the propellers
before binding.)
7
