17
GAUI
GAUI
TAI SHIH HOBBY CORPORATION
TAI SHIH HOBBY CORPORATION
請至遙控器設定選單中【陀螺儀感度GYRO】至鎖定狀態，向右撥動尾舵搖桿，尾軸滑套須向尾齒箱移動，若不是請調整遙控器選單中
【伺服機正反向設定】選項中【RUDD】的正反向。
設定尾舵左右最大行程量，左右最大行程量保持與尾齒箱及尾旋翼頭 0.5mm 距離不干涉為主。
(各廠牌陀螺儀行程量設定方法不同請參照陀螺儀說明書作設定)。
1.Set the gyro to heading-hold mode, move the rudder stick rightward and make sure the tail pitch slider move towardward to the tail gear case, if it is not,
switch the transmitter function “ Servo Reverse ” of “ Rudder” to the opposite position.
2.Set the “ Limit ” on your gyro properly to have the maximum travel of tail pitch control, make sure the tail pitch slider at its maximum travel to left and
right should not touch the Tail Gear Case and Tail Hub, there should be a distance for 0.5mm( or less ) at each side.
Please follow your own gyro's instruction manual for adjustments.
機構檢查-3
螺距/油門曲線設定
油門曲線
一般飛行模式
特技1模式
特技1模式
一般飛行模式
螺距曲線
Check - 3
Thhrottle Curve and Pitch Curve
Throttle Curve
Normal Flight
Freestyle/Aggresive
Freestyle/Aggressive
Normal Flight
Pitch Curve
Point-L Point-1 Point-2 Point-3
Point-5
Point-4
Point-H
0%
35%
60%
70%
80%
90%
100%
Point-L Point-1 Point-2 Point-3
Point-5
Point-4
Point-H
95%
95%
93%
91%
90%
91%
93%
Point-L Point-1 Point-2 Point-3
Point-5
Point-4
Point-H
41%
38%
47%
55%
67%
83%
100%
Point-L Point-1 Point-2 Point-3
Point-5
Point-4
Point-H
100%
83%
66%
50%
33%
16.5%
0%
