S222 & S222.250 & S222.100
|
USER GUIDE
58 | Working with Chloe
5.
Increase the BP cuff pressure when the display
prompts you to inflate the cuff one value at a
time. Continue to tap "SET" after setting each
increment.
The OMNI 2 will prompt you to increase the
BP cuff pressure from 0 to 300 mmHG.
6.
Tap “SAVE” at the end of the calibration process.
NOTE: It is not necessary to recalibrate the
BP Arm for each training session. The OMNI 2
controller will remember the calibration settings.
Adjusting the Blood Pressure
1.
To adjust the BP, tap the “Vitals” page.
2.
Tap “Blood Pressure” and use the top slide
bar or the + or – sign to increase or decrease
the systolic value. Use the bottom slide bar
to increase or decrease the diastolic value.
