3 / 28
16540_jh_V1
Index
Introduction
......................................................................... 4
Service Centre
.................................................................... 4
Intended use
....................................................................... 5
Package content
................................................................. 5
Symbols explication
........................................................... 6
Safety notes
........................................................................ 6
Installation
........................................................................... 9
Construction of the front arms
.......................................... 9
Construction of the back arm
........................................... 9
Assembling the main chassis
.......................................... 12
Installing the upper chassis plate
................................... 12
Assembly of the head
....................................................... 13
Installing the head
............................................................ 15
Installing the FPV transmitter with the camera BEC on
the upper chassis plate
.................................................... 15
Installing the controller and the BEC
.............................. 16
Installing the receiver
....................................................... 16
Installing the arms on the main chassis plate
............... 17
Schematic diagram
.......................................................... 18
Soldering the XT-60 connector
........................................ 18
Commissioning version 16540.CAM
............................... 19
Commissioning version 16540 or 16540.C
..................... 19
Receiver’s binding
............................................................ 19
Necessary pre-settings on the transmitter
.................... 20
Initialization of the gyro in the receiver
.......................... 20
Installing the propellers
................................................... 21
First flight
.......................................................................... 21
Using camera / transmitter version 16540.CAM
............ 22
LED function head
............................................................ 22
Technical Data
.................................................................. 23
Replacement parts
........................................................... 24
Firmware update receiver
................................................ 25
Declaration of conformity
................................................ 26
Notes on environmental protection
................................ 27
Care and maintenance
..................................................... 27
Warranty certificate
.......................................................... 27
