7 / 28
16540_jh_V1
• First, always perform a range and function test on the ground
(to do so, hold your model tight), before you use your model.
Repeat the test with running motor and with short throttle
bursts.
• Before you start using the remote control model, you have
to check the further relevant laws and regulations. These
laws you must obey in every case. Pay attention to the pos-
sibly different laws of the countries.
• The insurance is mandatory for all kinds of model operation.
If you already have one, so please inform yourself if the oper-
ation of the respective model is covered by your insurance.
If this is not the case, conclude a special liability insurance
policy for models. We recommend to provide the
HoTT Hor-
net
with a label, where are indicated the name, address, tel.
n., E-mail and Insurance N. So that the copter can be clearly
assigned in the event of a crash.
• Due to safety and licensing reasons (CE), any unauthorized
reconstruction and/or modification of the product is prohib-
ited.
• Only use the components and spare parts that we recom-
mend. Always use matching, original
Graupner
plug-in con-
nections of the same design and material.
• Make sure that all of the plug-in connections are tight. When
disconnecting the plug-in connections, do not pull the
cables.
• Protect the Copter from dust, dirt, moisture and other foreign
parts. It must be protected from vibration as well as exces-
sive heat or cold. The models may only be operated remotely
in normal outside temperatures such as from -10°C to
+55°C.
• Only operate all your
HoTT
components using the current
software version.
• If you have questions which cannot be answered by the
operating manual, please contact us (contact information
see page 3) or another expert in the field.
Inform yourself before flying your
model on which maximum
altitude you can fly in the uncon-
trolled airspace over the starting
position and do not exceed it.
