background image

GAVITA International bv

Oosteinderweg 127

1432 AH Aalsmeer

The Netherlands

Tel:   +31(0)297-380 450

Fax:  +31(0)297-380 451

E:   info@gavita.com 

W:   www.gavita.com

Manual: GAN Electronic 250W 400V Interlight

Changes reserved - Version 17/23

Inspection, maintenance and repair

   Warning!

 Disconnect the product from mains before performing any maintenance or repairs. 

   Warning!

 Do not connect or disconnect the fixture under load.

   Warning! 

Do not open or disassemble the fixture, it contains no servicable parts inside. Opening the fixture can be 

dangerous and will void the warranty. 

   Warning!

 Always allow for a cool down period of at least 30 minutes before touching the lamp.

  Caution!

 Do not clean the fixture with detergents, abrasives or other agressive substances. 

 

 Note: 

Gavita recommends to measure the lamp for aging every year. Replace the lamp  when it is aged.

• 

Regularly check the fixture for dust or dirt buildup. Clean if necessary. Contamination may cause overheating and decreased 

performance.

 

- Clean the outside of the fixture using a dry or damp cloth.

• 

Check the lamp monthly for discolorations or black markings. Always replace a damaged lamp.

 

 Note: 

Before initial use, the lamp could have black markings. This will disappear when the lamp runs on full power. If not, 

replace the lamp.

• 

Regularly check the wiring of the product to ensure it is undamaged.

6.1 

Placement and replacement of the lamp

  Warning! Always allow for a cool down period of at least 30 minutes before touching the lamp.

  Caution! Do not touch the lamp with bare hands as this will damage the lamp. Always use a fabric glove to handle the lamp. 

  Caution! Only use lamps specified by Gavita (see paragraph 3.3).

 

 Note: 

Gavita recommends replacing the lamp after 10000 lighting hours.

• 

Switch off mains power.

• 

Hold the lamp with a fabric glove to prevent it from falling. Use a protective glove if the lamp is damaged.

• 

To remove a lamp, turn it counterclockwise and take it out (1).

• 

To place a lamp, turn it clockwise until it is securely fastened.

• 

Switch on mains power.

Summary of Contents for GAN Electronic 250W 400V Interlight

Page 1: ...ials With this symbol Gavita declares that this product complies with legal European requirements The symbol on the material accessories or packaging indicates that this product may not be discarded as household waste By disposing of the equipment in the proper way you will be helping to prevent possible risks to the environment and public health which might otherwise be caused by improper handlin...

Page 2: ...s It is for industrial use only The product can be used in damp environments The product may not be used in wet environments or outdoors The lamps function optimally when the ambient temperature is between 20 30 C 68 86 Fahrenheit 3 5 Legal This device complies with Conformité Européenne EN60928 and EN60926 4 Safety recommendations and warnings Warning Carefully read the warnings below before usin...

Page 3: ...ilure and damage to the fixture Damage to the fixture and electronic circuitry as a result of incorrect installation and use revokes the warranty 5 Installation Warning Mounting and installing of the fixture may only be executed by certified service personnel in accordance with the applicable local laws and regulations Warning The fitter is responsible for correct and safe installation Warning Ens...

Page 4: ...lean if necessary Contamination may cause overheating and decreased performance Clean the outside of the fixture using a dry or damp cloth Check the lamp monthly for discolorations or black markings Always replace a damaged lamp Note Before initial use the lamp could have black markings This will disappear when the lamp runs on full power If not replace the lamp Regularly check the wiring of the p...

Reviews: