STEPS
5. COVER INSTALLATION
(Ties are always on the inside)
a) Place the roof in front of the shelter as illustrated.
b) Unfold as illustrated then lift onto shelter as is.
c) The front of the garage has windows on the 2 sides (one each on the right and left, if supplied).
d) Place cover over the completed structure making sure that the TRIANGLE is at the front of the garage.
e) Attach all straps inside of the roof around the structure poles, going completely around the garage.
f) Tie inside ties firmly to pipes.
g) Grommets are placed in the upper corner of each door. Put the remaining cord through these grommets
and secure to the ground with nails.
6. DOOR ASSEMBLY
a) Take one door with shiny side facing outside and place onto hooks (M).
b) Repeat a) for the remaining doors.
c) Take an elastic, put through one of the grommet holes on the door from the inside out. Take S hook, place it
on the elastic and squeeze one end with a pair of pliers so it locks on the elastic. Repeat until all the elastics
are done, and then use the open end to hook onto the grommet band on the side of the roof.
7. SHELTER REINFORCEMENT
a) Place your shelter in the final position you want then close the front and back doors (if supplied)
before anchoring, anchor with brackets (K) and nails (J) as per diagram.
b) Fix flap to your house (if applicable). The structure has to be anchored on a flat leveled surface
as asphalt, concrete, etc. Additionnal anchors are not included.
STEP 5
STEP 6
STEP 5
STEP 7
