EN
2.1.3 Installing a down tube type battery
1. Insert the battery from below.
Align the concave section on the bottom of the battery with the convex section
on the battery holder and then insert the battery.
2. Slide the battery.
Push the battery until you hear it click into place.
50
HANDLING THE BATTERY
Installing the battery
2.
Slide the battery.
Push it in firmly until you hear it click into place.
3.
Remove the key.
Return the key to the locked position, and then remove it.
Built-in type
The following procedure uses a type of frame where the battery is installed/removed from the
lower side of the down tube as an example.
Refer to the user's manual for details.
1.
Use the following procedure to insert from the lower side of the
battery.
(1) Insert from the lower side of the battery.
(2) Slide the battery. Push it in firmly until you hear it click into place.
(2)
(1)
NOTICE
• After pushing the battery in, pull the battery to confirm that it is locked securely.
49
HANDLING THE BATTERY
Installing the battery
Rear carrier mount type
1.
Insert the battery into the rail from the rear of the bicycle.
Slide the battery to the front and push it in firmly.
Rail
2.
Remove the key.
Return the key to the locked position, and then remove it.
Down tube mount type
1.
Insert the battery from below.
Align the concave section on the bottom of the battery with the convex section on the
battery mount, and then insert the battery.
3. Remove the key.
Return the key to the locked position and then remove it.
2.1.4 Removing a down tube type battery
1. Insert the key.
Push the on-off button to switch OFF the power, and insert the key into the socket
on the battery holder.
52
HANDLING THE BATTERY
Removing the Battery
Down tube mount type
1.
Insert the key.
Press the power switch to turn the power OFF, and then insert the key into the socket on
the battery mount.
<BT-E6010>
<BT-E8010/BT-E8014>
Power switch
Key
Socket
Power switch
2.
Release the battery lock.
Turn the key until you feel it make contact.
3.
Slide and carefully remove the battery.
52
HANDLING THE BATTERY
Removing the Battery
Down tube mount type
1.
Insert the key.
Press the power switch to turn the power OFF, and then insert the key into the socket on
the battery mount.
<BT-E6010>
<BT-E8010/BT-E8014>
Power switch
Key
Socket
Power switch
2.
Release the battery lock.
Turn the key until you feel it make contact.
3.
Slide and carefully remove the battery.
49
