8
EN
Installation tips
•
For Gazer CM70XX-XXX multimedia system installation, the original climate control buttons must be unmounted. Free
plugs must be connected with the multimedia system. Climate control is further set up using the sensor panel of the
Gazer CM70XX-XX multimedia system.
•
For Gazer multimedia system installation, one must check that all plugs and jacks are connected in accordance with the
connection diagram.
•
Make sure that the yellow BAT+ wire of the power cable is connected to the plus terminal of the car battery, while the
red ACC wire is connected to the auxiliary equipment bus (+12V voltage is supplied when the ignition key is turned to
АСС position).
•
Prior to installing the system, one must consider where to place the remote elements such as GPS antennas and USB
ports.
•
Lay all cables under the trim.
•
Connect the stock USB and AUX connectors to the multimedia system (depending on the car model).
•
Connect the system to the Internet to take full advantage of all features of the Gazer multimedia system.
Caution!
Incorrect power connection may cause the multimedia system to malfunction or fail.
Summary of Contents for CM70 Series
