Gazer F122G, User Manual

ENG

20

Tape mount installation

Warning!

 Wipe the surface of the windshield before in-

stalling. Make sure the place of installation is dry and 

clean. Do not install the mount on 3M scotch tape at 

temperatures below +5°C. Due to such low temperature 

and the difference between the temperature inside the 

car and outdoors, the 3M scotch will lose its adhesive 

properties and will not be able to fix the mount properly.

 tape mount installation

Warning!

Wipe  the  surface  of  the  windshield  before  installing. 

Make sure the place of installation is dry and clean. Do not install 

the mount on 3M scotch tape at temperatures below +5°C. Due 

to  such  low  temperature  and  the  difference  between  the 

temperature inside the car and outdoors, the 3M scotch will lose 

its  adhesive  properties  and  will  not  be  able  to  fix  the  mount 

properly.

Attach the MVR frame to the 3M scotch 

mount.

Remove the protecting film from the 

mount.

Fix the mobile video recorder on 3M 

scotch tape to the selected place on 

the windshield. 

Loosen screw 

1

 by turning it 

counterclockwise. Regulate the MVR 

position on the mount and set the 

recording angle. Tighten screw 

1

 by 

turning it clockwise.

To remove the MVR from the mount, 

first press tab 

1.

 Then, holding the tab, 

remove the recorder from the mount by 

sliding it to the side 

2

.

To remove the mount from 3M tape, 

take a ruler or credit card, and push it 

gently between the mount and the 

windshield.

1

2

3

4

5

6

1

1

2

Attach the MVR frame to 

the 3M scotch mount.

To remove the MVR from 

the mount, first press tab 

1

. 

Then, holding the tab, remove 

the recorder from the mount 

by sliding it to the side 

2

.

Fix the mobile video re-

corder on 3M scotch tape 

to the selected place on 

the windshield.

Remove the protecting film 

from the mount.

To remove the mount from 

3M tape, take a ruler or 

credit card, and push it gen-

tly between the mount and 

the windshield.

Loosen screw 

1

 by turning it 

counterclockwise. Regulate 

the MVR position on the 

mount and set the recording 

angle. Tighten screw 

1

 by 

turning it clockwise.

 tape mount installation

Warning!

Wipe  the  surface  of  the  windshield  before  installing. 

Make sure the place of installation is dry and clean. Do not install 

the mount on 3M scotch tape at temperatures below +5°C. Due 

to  such  low  temperature  and  the  difference  between  the 

temperature inside the car and outdoors, the 3M scotch will lose 

its  adhesive  properties  and  will  not  be  able  to  fix  the  mount 

properly.

Attach the MVR frame to the 3M scotch 

mount.

Remove the protecting film from the 

mount.

Fix the mobile video recorder on 3M 

scotch tape to the selected place on 

the windshield. 

Loosen screw 

1

 by turning it 

counterclockwise. Regulate the MVR 

position on the mount and set the 

recording angle. Tighten screw 

1

 by 

turning it clockwise.

To remove the MVR from the mount, 

first press tab 

1.

 Then, holding the tab, 

remove the recorder from the mount by 

sliding it to the side 

2

.

To remove the mount from 3M tape, 

take a ruler or credit card, and push it 

gently between the mount and the 

windshield.

1

2

3

4

5

6

1

1

2

 tape mount installation

Warning!

Wipe  the  surface  of  the  windshield  before  installing. 

Make sure the place of installation is dry and clean. Do not install 

the mount on 3M scotch tape at temperatures below +5°C. Due 

to  such  low  temperature  and  the  difference  between  the 

temperature inside the car and outdoors, the 3M scotch will lose 

its  adhesive  properties  and  will  not  be  able  to  fix  the  mount 

properly.

Attach the MVR frame to the 3M scotch 

mount.

Remove the protecting film from the 

mount.

Fix the mobile video recorder on 3M 

scotch tape to the selected place on 

the windshield. 

Loosen screw 

1

 by turning it 

counterclockwise. Regulate the MVR 

position on the mount and set the 

recording angle. Tighten screw 

1

 by 

turning it clockwise.

To remove the MVR from the mount, 

first press tab 

1.

 Then, holding the tab, 

remove the recorder from the mount by 

sliding it to the side 

2

.

To remove the mount from 3M tape, 

take a ruler or credit card, and push it 

gently between the mount and the 

windshield.

1

2

3

4

5

6

1

1

2