Gazer H714, User Manual

Settings menu

Recording quality

Frame rate

Time setup

Auto rec

Audio recording

Light frequency

Language

Format

Parking mode

G-SENSOR 

sensitivity

Auto-off time

Specifies the resolution of recorded videos.

It  is  recommended  to  use  the  1280x720  mode,  30fps,  if  you  use

a 8-32 GB memory card.

Recording speed setting.

It is recommended to use the 30 fps recording speed. The lower the recording 

speed, the more difficult it is to reconstruct the course of traffic events and use 

the video as evidence.

HD (1280x720), SD (648x480)

30 fps, 15 fps, 5 fps

Automatic activation and recording when  ACC  power is supplied.

It is recommended to use the auto recording setting. 

On, Off

On, Off

Turning on/off the sound recording option. 

Default microphone setting on the recorder startup. The new setting will be saved 

automatically when the device is used next time.

Automatic  recorder  shutdown  after  a  certain  period  following  the  ACC 

power off.

Set the required operation time after the ACC power is off.

1M, 1H, 6H, 12H, 1D, 2D, Never

Disable, Low, Normal, High 

Setting the three axes shock sensor sensitivity.

Files,  recorded  during  the  shock  sensor  operation  (sudden  acceleration, 

braking, and collision) are automatically.

50 Hz, 60 Hz

Setting up the built-in video camera.

The recommended frequency for USA is 60 HZ. The recommended 

frequency for Europe is 50 HZ.

Off, On

Select the MVR operation mode after the ACC power is off.

Shock sensitivity

Disable, 2X, 3X, 5X, 10X

Adjust the three axes shock sensor sensitivity when the vehicle is parked.

As the value increases, the sensitivity of the sensor goes up and similarly 

as the value decreases, the sensitivity goes down. Files, recorded during 

the shock sensor operation are automatically protected from overwriting.

Car battery

protect

11.7V, 11.5V

Minimum voltage of the car’s cigarette lighter socket. When reached, the  

MVR switches off automatically.

Default setting

No, Yes

Restart the system and revert to factory settings.

Select the menu language.

Format the memory card.

No, Yes

Date and time setting.

We recommend that you use accurate date and time settings and check 

periodically.  Date  format  used:  YY:  MM:  DD  (Year:  Month:  Day).  Time 

format used: 24-hours (hour: minute: second).

YY:MM:DD, HH:MM:SS

Viewing records  

You  can  view  the  records  with  the  MVR.  Alternatively,  you  can 

remove your memory card and watch the records on your personal 

computer. 

Connect  the  recorder  to  a  monitor  or  a  TV  set  using  the  RCA 

composite  video  output.  Make  sure  the  device  is  connected  to  a 

power supply. 

Stop  the  current  recording  by  pressing  the  •  REC  button,  then 

switch to «view» by short pressing the RIGHT button.

To  navigate  through  videos,  use  the  LEFT  and  RIGHT  buttons.  

OK button will start or stop playback. When you finish viewing, do 

not forget to resume the recording by pressing the • REC button.

MVR viewing

Connect the memory card to your computer and run the file.

After  that,  the  Gazer  Player  window  will  appear  on  the  screen. 

Using this program you can view your videos, make  screenshots, 

delete or save videos in AVI format on the your PC.

Gazer Player viewing

Gazer Player

ENG

17