Version 17.11.2017
HW:CAM(V82)GD
RL3-MIB-4
P
a
g
e
7
1.5.
Settings of the 4 Dip switches (CAN functions – red)
All 4 dip-switches of the CAN-box have no function for normal use
except Porsche vehicles with PCM 4.0 and must be set to OFF.
Dip position down is ON and position up is OFF.
Vehicle/Navigation
Dip 1
Dip 2
Dip 3
Dip 4
All vehicles
OFF
OFF
OFF
OFF
Porsche with PCM 4.0
OFF
ON
OFF
ON
After each Dip-switch-change a power-reset of the Can-box has to be performed!
2.
Installation
To install the interface, first switch off the ignition and disconnect the vehicle’s battery.
Please read the owner`s manual of the car, regarding the battery`s disconnection! If
required, enable the car`s Sleep-mode (hibernation mode)
In case the sleep-mode does not succeed, the disconnection of the battery can be done
with a resistor lead.
If the necessary stabilized power supply for the interface is not taken directly from the
battery, the chosen connection has to be checked for being constantly stabile.
The interface needs a permanent 12V source!
2.1.
Place of installation
The interface is built to be connected behind the vehicle`s head-unit.
www.eldibg.com
car audio, multimedia & security systems
All manuals and user guides at all-guides.com
