13
D A N G E R
When equipping, or carrying out
maintenance and repair work, watch out
for hazards
caused by electric shock.
Maintenance of the device
In the case of maintenance, observe the following guidelines:
•
Never clean with compressed air, you should only use vacuum. Use appropriate tools (vacuum
cleaner).
•
After maintenance, perform visual inspection.
W A R N I N G
Maintenance, cleaning and repairs can only be carried out:
• By specialists
• When the device is switched off and secured against switching on
• With personal protective equipment and appropriate clothing
5. Instructions for transport and storage
N O T E
Transport can only be carried out by qualified personnel in accordance with
local conditions.
Staff should be fully trained in the field of transport.
The device is to be transported to the place of installation with adequate special vehicles and installed at
the appropriate location by using forklifts or cranes.
W A R N I N G
The machine can
tip over
during transport. Pay attention to its center of
gravity. Before transportation secure it with ropes or other means.
In determining the necessary space for transportation it is necessary to take
account of a possible tilt of the device (the height of the components).
The lifting device must be capable of carrying the weight of each item; the operator shall be responsible
for the operating of the lifting device.
Installation and assembly should be carried out according to the plans of the layout.
Observe the appropriate weight.
N O T E
The device can be moved manually or in other manner (forklift, crane…)!
Before moving the device needs to be adequately protected!
Devices should be transported wrapped in foil or cardboard packaging and, where appropriate, need to
be protected against mechanical damage. If necessary, they should be installed on pallets.
The permissible temperature range during transport and storage is between -
25 ° C and + 55 ° C, while
for short periods of time, not exceeding 24 hours, temperatures of up to + 70 ° C are allowed.
WARNING:
Devices should not be placed on surfaces with doors or carrying equipment!
