15
14
Contents
1 | Scope of delivery
15
2 | General information
15
2.1 | Reading and keeping the instructions for use
15
2.2 | Explanation of symbols
16
3 | Safety
16
3.1 | Intended use
16
3.2 | Safety instructions
17
4 | Installation
19
4.1 | Legal requirements regarding the installation of turn signals
19
4.2 | Preparation
19
4.3 | Installation
20
4.4 | Electrical connection
20
4.5 | Adjusting the turn signal
22
5 | Storage
23
6 | Cleaning and care
23
7 | Troubleshooting
23
8 | Warranty
23
9 | Disposal
24
10 | Contact
24
MIRROR WITH LED SEQUENTIAL TURN SIGNAL
1 | Scope of delivery
2 | General information
2.1 | Reading and keeping the instructions for use
These instructions for use apply exclusively to the aforementioned gazzini
Mirror with LED sequential turn signal (for short: mirror). They contain important
information on installation, safety and the warranty. Read these instructions
carefully, in particular the safety instructions, before installing the gazzini Mirror.
Failure to follow the instructions may result in damage to the mirror itself or
to your motorcycle, make it less safe to ride on the road, and possibly cause
consequential damage. Keep these instructions for future reference. If you pass
the gazzini Mirror on to a third party, you must also hand over these instructions.
1
1x mirror housing, including LED
sequential turn signal and mirror stem
2 x rubber grommets for
Japanese connector
2
1x flat-headed screw with hexagon
socket DIN 7380 M6 x 16 A2
7
1x threaded adapter M10 x 1.25
(left-hand thread)
3
1 x tooth lock washer
DIN 6797 A 6.4 A2
8
1x threaded adapter M10 x 1.25
(right-hand thread)
4
1x mirror joint
9
1x threaded adapter M10 x 1.5
(right-hand thread)
5
2 x Japanese connector
6
Translation of original instructions for use
1
4
2
3
7
8
9
5
6
Art. No. 10030302
