26
REMOVING THE SEAT COVER
The seat cover consists of five parts which are fixed to the seat
with velcro, press studs or button holes. Once you have released
the fasteners, the cover parts can be removed. To remove the
covers, please follow the instructions below:
To put the covers back on the seat, proceed as above in reverse
order. Make sure that the red belt guide
20
always rests visible
above the seat cover.
•
Undo the press studs on the lower side of the cover for the
adjustable headrest. Then you can remove the cover upwards.
•
Activate the adjustment handle for the headrest and move this
to its highest position.
•
Loosen the covers on the rear side of the headrest. Then pull the
cover off forwards.
•
Pull down the cover on the left and right side panel of the
shoulder rest. Then undo the press studs on the interior of the
shoulder wings in order to be able to entirely remove the cover.
•
Loosen the backrest cover from the seat. Then pull the cover
off forwards.
•
Then thread the elastic bands out on the under side of the seat
area, and withdraw the seat cushion cover forwards.
NOTE!
Before removing the separate parts of the seat cover,
please ensure that the cover is already positioned above the
decorative silver parts.