GBA Global Bill Acceptors
GBA GV1 Operation Manual
Astrosys International Ltd
October 2018
GBA GV1 Operation Manual v2.00 Page 16 of 33
5.0 MECHANICAL INSTALLATION
The GV1 unit should be mounted in an upright and vertical manner, i.e. with the ST2 validation
module at the top of the unit. Please contact your Astrosys office for advice on any variation to this
arrangement.
Threaded holes (metric M4 x 0.7) are provided on the steel sideplates for mounting into cages &
framework. Care should be taken that the screw length used is appropriate - screws that are
excessively long may interfere with functionality such as insertion/removal of the Cashbox. Other
non-threaded holes are provided to allow other attachment options, particularly on the rear &
bottom faces of the unit. Again, care should be taken to ensure that screw heads or other fastener
features do not interfere with the unit's functionality.
Details of product dimensions can be found in Section 11 of this document.
This section will be expanded in future releases
