GBA Global Bill Acceptors
GBA GV1 Operation Manual
Astrosys International Ltd
October 2018
GBA GV1 Operation Manual v2.00 Page 24 of 33
9.2 Clearing a Note Jam
The design of the GBA GV1 allows rapid access to the note path for the clearance of jams
occurring after the insertion of damaged notes & foreign material.
1. Ensure the power supply to the GBA GV1 unit is switched OFF
2. Remove the Head Unit assembly from the GV1 unit if the host enclosure does not allow
access to the ST2 validation module and opening Rear Housing
3. Squeeze the release levers for the top-half of the ST2 validation module and swing it open
(see pics 1 & 2)
4. Lift the release lever for the Rear Housing and swing the Housing open (see pics 1 & 2)
5. The ST2 top-half and Rear Housing can both be fully removed if desired (see pic 3)
6. Clear the jammed note(s) from the note path
7. If necessary, remove the Cashbox, open and clear any jams inside the Cashbox
8. Re-assemble unit and switch the power supply back ON
1
2
