GBA Global Bill Acceptors
GBA GV1 Operation Manual
Astrosys International Ltd
October 2018
GBA GV1 Operation Manual v2.00 Page 4 of 33
2.0 PRODUCT INFORMATION
2.1 General Specifications
Bill Insertion:
Up to 32 bill denominations with 4-way insertion
Bill Dimensions:
62 to 85mm wide; 120 to 165
mm long
Bill Acceptance Rate:
Greater than 95%
Cycle Time for Validation and Stack:
3 seconds (excluding authorisation from host)
Interface Protocols Supported:
Includes Pulse, Parallel, ccTalk
®
, Serial BSCP, Mars
Serial A, SSP, SGI, GSA USB, NAMA MDB
Power Supply (nominal):
12-42Vdc @ 4A
Power Consumption (Idle/Standby):
450mA @ 12V typical
(Validating):
1.5A @ 12V typical
(Stacking):
1.5A @ 12V typical
(Peak/Inrush/Stalled):
3.5A @ 12V
Environmental Range (Operating Temp):
0° to 55°C
(Operating Hum):
Up to 90% R.H., non-condensing
(Storage Temp):
-10° to 65°C
2.2 Product Architecture
2.2.1 Image of GV1 product assembly
The GV1 unit consists of three major modules:
(1) Head Unit assembly, incorporating the 'ST2' currency validation module
(2) Mounting Bracket
(3) Cashbox
Units are typically completed by the addition of a (4) Noteguide Base with currency-specific
noteguide inserts, and in some applications, the further addition of a (5) Bezel (varying designs).
The GV1 unit allows rapid access to the major modules and their component elements, as shown
in the following sections.
1
2
3
4
5
