Operating Instructions
Page 5-2
44DT
F
EED
T
ABLE
The feed table is used to position items for
laminating and mounting.
When the feed table is
removed, the laminator runs at 3 fpm (0.9 mpm)
when you press the RUN button.
The feed table is
removed only when you load film.
T
ABLE
I
NTERLOCK
L
ATCH
(Not shown.) The interlock latch locks the feed table
into position and activates an interlock switch. The
latch is located on the left, underside of the feed
table. Move the latch to the right to release the
table. Then lift the table upwards and away from the
laminator.
B
OTTOM
F
ILM
S
UPPLY
S
HAFT
Holds the film or kraft paper on the machine.
F
ILM
W
EB
(Not shown.) The path the laminating film and/or
mounting film mounted on the machine takes
through the machine.
C
ORE
A
DAPTORS
Fig. 5-2. Core Adaptors on the Shafts.
The core adaptors hold and lock the rolls of film
and release liner on the shafts to prevent side to
side shifting. Grippers on the supply shafts ensures
proper tension on the film. The supply shaft core
adaptors lock in place with a set screw. The release
liner take-up core adaptors are held in place by
friction.
R
OLLER
P
RESSURE
H
ANDLE
Fig. 5-3. Roller Pressure Handle.
The roller pressure handle adjusts the amount of
roller pressure needed for various laminating and
mounting applications. Pull the handle out of a
position, rotate it to the desired pressure, and press
it into the slot. Three main function settings provided
are.
Release –
Provides the widest opening between the
pressure rollers and takes pressure off the rollers.
This is used when installing new rolls of film. When
the machine is not in use, put the handle in this
position.
Mounting –
Used when bonding to a rigid substrate
such as mounting boards. Thickness range is 1/32 to
3/16 in. (1 to 5 mm).
Laminating –
Used to adhere materials in multiple
substrates. The two positions are low and high
pressure.
IMPORTANT:
Use a pressure setting that is
appropriate for the material you are laminating or
mounting.
Supply shaft
Take-up shaft
Core adaptor
Gripper
Summary of Contents for 44DT
