Page 4 - 6
Installation
Digital Feeder Operation and Maintenance Manual
© GBC Pro - Tech February 2000
W A R N I N G
The unpacking process requires at least two
people. You can be severely injured, crushed
or cause damage to the equipment.
With regards to your shipping methods, use one
of the following procedures described to safely and
properly unwrap / uncrate your cutter.
4.4 Shrink wrapped
Tools required
• # 2 Phillips head screwdriver
• Large adjustable wrench
• Crow bar
• A second person
a) Inspect the machine for any obvious shipping
damages upon receipt.
INFORMATION
Claims for shipping damages must be
handled between your insurance company
and the shipping compnay.
b) Carefully unwrap the shrink wrap from around
the Digital Feeder.
CAUTION
Do not use an open blade to cut the shrink
wrap from the machine. You can cause
damge to the equipment!
c) Move all packing materials to a safe distance
from the equipment and dispose of properly.
INFORMATION
The shrink wrap is not recyclable, therefore
it must be discarded.
d) Use two people to carefully roll the feeder and
conveyor to the desired location.
W A R N I N G
Do not attempt to move the Digital Feeder
across anything other than a flat level
surface . You can be crushed
or seriously injured.
