Page 8 - 1
Maintenance
Digital Feeder Operation and Maintenance Manual
© GBC Pro - Tech February 2000
Section 8 Maintenance
GBC’s Digital Feeder requires minimal
maintenance. However, regular maintenance is essential
to keep any piece of precision machinery at peak
performance. A maintenance schedule and a section of
procedures are included in this section.
W A R N I N G
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the feeder. These items can
get caught in the machine and choke
you or you can be crushed.
Improper maintenance, can result in
poor output quality.
INFORMATION
GBC offers Extended Maintenance Agreements.
The only maintenance required by the operator is
to maintain clean air and overall cleanliness of the machine
itself.
8.1 Maintenance Schedule
Below is a recommended maintenance
schedule. Before performing any of the steps
listed, read through the procedures first.
Please follow the instructions pertaining to
the step you are performing.
INFORMATION
D A N G E R
At no time should remove any covers
or panels in an attempt to perform
repairs or adjustments.
Daily
• Inspect the electrical cord for damage.
( If damaged, you should replace or
repair it immediately )
• Inspect the pneumatic hoses for
damage.
( If damaged, you should replace or
repair it immediately )
• Inspect the encoder cable for damage.
( If damaged, you should replace or
repair it immediately )
• Empty the water trap
( If you do not use the feeder daily,
empty the water trap weekly )
