background image

4

   Place the paper or credit card into the centre of entry slot (B), 

place CD into the centre of entry slot (C) - shredding will start 
automatically.

   Paper smaller than A4 in width should be placed in the middle of the 

entry slot (B) to ensure the shredder works automatically.

   The cutters will stop rotating automatically after finishing shredding.

   A separate CD tray is provided to collect the shredded CD shards. CD 

and credit card shards should be disposed of separately to paper.

    Don’t shred more than 10 sheets of paper at a time. Do not attempt 

to shred more than one credit card or CD at a time.

   If too many sheets are inserted at a time, the shredder can become 

jammed. If the shredder becomes jammed, switch the button to 
reverse (   ) position to clear the jam by reversing the paper. If 

the paper has become so entangled in the cutter that it can’t be 
reversed, turn off the power and pull out the paper by hand. Restart 
with fewer sheets and feed the nonshredded end of the paper in first.

CAUTION: Don’t let the machine operate continuously 
for more than 2 minutes. When the motor has 
overheated, the thermal safety switch will start 
working automatically. If the thermal switch trips, do 
not use the machine for about 45 minutes while the 
thermal sensitive safety switch cools down so the 
shredder can be safely used again.

Emptying the waste basket

Empty the shredder bin regularly. Over filling the bin will cause the 
shredder to stop operating.

   Unplug the product and lift away the head.

   Empty the shredder bin.

   Locate the shredder onto the bin. 

CAUTION:

t

 Never insert fingers into the entry slot of the 
shredder.

t

 Turn the power off immediately if your hair, tie or 
sleeve becomes entangled in the shredder.

t

 Empty the shredder bin when it is full otherwise the 
shredder’s performance will be adversely affected. 
Operating the shredder with a full shredder bin can 
result in paper jamming in the cutters, which will 
increase the machine’s noise level.

Lubrication of the shredder

Only use Rexel Oil Sheets (2101948 & 2101949) to lubricate. ACCO 
Brands accepts no liability for product performance or safety when other 
types or brands of lubricants are used on any part(s) of this machine.

CD and Credit Card Shredding 

   A separate CD tray is provided to collect the shredded CD shards. 

Ensure that this is correctly mounted onto the bin before shredding 
CDs or credit cards. CD and credit card shards should be disposed 
of separately to paper.

   Empty the CD tray after 8 credit cards or CD’s to avoid waste 

spilling over into the paper waste bin. Remove the CD tray before 
recommencing to shred paper.

   Credit cards should only be shredded through the centre of the main 

paper entry slot (not the CD slot). This is to ensure that the strip 
and the chip on the credit card are destroyed. GBC encourages 
customers to recycle shredded paper. Please note that shredded 
paper can not be recycled if mixed with credit card shards. If 
recycling, please separate shredded paper, credit cards and CDs.

Preparation before use

How to use the shredder correctly:

t

 Take care not to insert fingers, ties or other objects into the entry slot 
of the shredder.

t

 We recommend to remove staples and paperclips, avoid laminating 
materials, plastic bags etc. from being passed through the shredder. 
This will prevent damage to the cutters.

t%POPUTISFEXFUQ

aper as it can tangle in the cutters.

t%POPUTISFENPSFUIBOQJFDFTPGQ

aper in one pass. 

t

 Do not shred continuously for more than 2 minutes at a time. Running 
the unit for too long may make the motor overheat. If the motor over 
heats, allow it to cool down for at least 45 minutes before resuming 
use.

t

 Do not use the reverse (   ) function if it’s not necessary.Over use 

of the reverse (   ) function can result in shredded paper becoming 

jammed in the entry slot, which will adversely affect the performance 
of the shredder.

t

 Unplug the product before moving or emptying the shredder basket.

Operation

   Insert plug (D) into the AC power socket.

  Slide the switch (F) to the AUTO position ( 

 )

   When not in use, slide the switch to the 

 (off position).

   Empty the waste basket regularly to ensure the shredder exit does 

not become blocked with paper.

7

8

9

10

Reviews: