F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999
Page 5 - 4
Operations
( 15 ) JOB
s
: When pressed once will increase the
job number in JOB DISPLAY by increments of 1. If
pressed and held, the JOB DISPLAY will increase to
9 at which point it will stop.
S E L
S A V
S H U T D O W N
5
15
J O B
( 16 ) JOB
t
: When pressed once will decrease the
job number in JOB DISPLAY by increments of 1. If
pressed and held, the JOB DISPLAY will decrease to
0 at which point it will stop.
S E L
S A V
S H U T D O W N
5
16
J O B
( 17 )SEL : When pressed will send the operating
parameters for the stored job number selected to the
correct devices. Any time JOB
s
or JOB
t
is
pressed, SEL will flash indicating a change in job
number.
S E L
S A V
S H U T D O W N
5
17
J O B
( 18 ) SAVE : When pressed, will save the current
settings for the number showing in the JOB DISPLAY.
For more information, refer to Section 5.4 Job
Programming on how to save parameters.
S E L
S A V
S H U T D O W N
5
18
J O B
( 19 ) SHUTDOWN : When pressed, automatically
raises the main roller gap setting to 1 in., turns the top
and bottom temperature controller units off and stops
the drive motor. The LCD on the control panel remains
illuminated and the SLEEP indicator will be solid.
S E L
S A V
S H U T D O W N
5
19
J O B
( 20 ) SPEED DISPLAY : Displays the current speed
setting of the laminator.
20
F W R
R E V .
S T O P
G O
S P E E D
S A F E T Y
6.5
