Page 6 - 24
© April 2001 General Binding Corporation
Applications
F 60 C Operation and Maintenance Manual
PROCESS CONTROL CHART
Materials - PSA Over-lamination of a mounted image
Top material : Roll of pressure sensitive laminate
Bottom material : N/A
Other material (s) : A pre-mounted image to a board, leader board and trailer board
Motor Direction
Motor Speed
1
2
3
4
5
6
7
8
9
10
range
Roller Pressure
RANGE
Notes : The laminate should not exceed the pre-mounted image by more than 1 in.
( 2.54 cm ). Speed will be determined by what is comfortable for the operator. Pressure
is dependent on the substrate. Do not crush the substrate. Use a leader board to start
the process and finish with a trailer board. Stopping on the image will leave an impres-
sion on the board or image. Use of the footswitch may be helpful for this application.
Refer to helpful hints for pressure sensitive materials and mounting.
