Page 8 - 2
Maintenance
F 60 C Operation and Maintenance Manual
© April 2001 General Binding Corporation
• Inspect the area around the laminator for
possible hazards
( dust buildup, combustible items stored too
close, etc. )
Semi-Annual
• Lubricate the grease fittings, chain, and gears.
( performed by service technician )
• Check wire termination tightness.
( performed by service technician )
ELECTRICAL
S H O C K
Remove power from the laminator before
servicing. You can be severely shocked,
electrocuted or cause a fire.
8.2 Cleaning the rollers
Tools required
• Protective rubber gloves
( This will protect your hands from the isopropyl
alcohol )
• 80% isopropyl alcohol
( a mild dishwashing detergent and water may
be used instead )
• Several 100% cotton terry cloths
( best for lint free cleaning )
a) Turn the main power to the ON position.
On
POWER
b) Press machine RESET.
POWER
Reset
