Page 8 - 3
Maintenance
F 60 C Operation and Maintenance Manual
© April 2001 General Binding Corporation
c) Set motor direction to REV.
(reverse)
(forward)
d) For pressure sensitive adhesives: put the rubber
gloves on and use isopropyl alcohol and a
terry cloth towel to rub the adhesive off.
CAUTION
Excessive pressure can destroy the silicone
layer by pressing to hard or scrubbing
too long in one spot.
W A R N IN G
W h en op eratin g th e lam in ator u sin g th e
footsw itch , k eep h a n d s a n d fin gers
aw ay from th e n ip of th e rollers.
Y ou m ay b e C R U S H E D !
d) Use the footswitch to rotate the rollers when
finished cleaning the exposed area.
8.3 Clean cabinets and covers
ELECTRICAL
S H O C K
Remove power from the laminator before
cleaning. You can be severely shocked,
electrocuted or cause a fire.
a) Use a damp cotton terry cloth ( water only ),
clean the exterior of the laminator.
b) If water is not strong enough, you may use a
mild dishwashing detergent with water and a
cotton terry cloth.
ELECTRICAL
S H O C K
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on
the laminator. You can be severely shocked,
electrocuted or cause a fire. Use only a damp
cloth for cleaning unless other wise
specified.
