Operations
Page 5 - 8
Orca 1600 Operation and Maintenance Manual
© GBC Films Group February 2001
5.4 Setting temperature
To increase or decrease temperature settings,
perform the following steps.
Increase;
IN F O R M A T IO N
W hen requirin g top and bottom h eat, it is
recom m ended to set both tem peratures to
the sam e set point.
a) Press and hold the asterisk key while pressing
the up key until the desired set point is
displayed on the temperature control unit.
225
C A L 3200
T he m axim um set point tem perature
is 270
o
F ( 132
o
C ).
IN F O R M A T IO N
b) Once the desired set point is displayed,
release both buttons.
c) Decrease main roller pressure, lower the upper
main roller, set a slow speed and press AUTO
to allow the rollers to roll for an even heating
surface.
Decrease;
a) Press and hold the asterisk key while pressing
the down key until the desired set point is
displayed on the temperature control unit.
68
C AL 3 200
T he m inim um set point tem peratu re
is 32
o
F ( 0
o
C ).
IN F O R M A T IO N
b) Once the desired set point is displayed,
release both buttons.
c) Decrease main roller pressure, lower the upper
main roller, set a slow speed and press AUTO
to allow the rollers to cool evenly.
