9
It is recommended that the machine be lubricated
once every two weeks. Lubricate by putting a few drops
of machine oil in the lubricating holes, which are marked
with red paint.
All gears in the main body of the machine run in pans,
which are partially filled with a special gear lubricating
grease. This grease should be replenished occasionally,
as required, with Lubriplate 630AA, obtainable at any
Lubriplate dealer.
USP 13 Universal Speed Punch
MAINTENANCE INSTRUCTIONS
All punching tools should be lubricated daily.
AT THE BEGINNING OF EACH SHIFT, IT IS SUG-
GESTED TO GREASE THE PUNCHING PINS OF
EACH TOOL BY APPLYING GEAR GREASE WITH A
SMALL BRUSH. “PAINT” THE GREASE ON THE
FRONT AND THE REAR OF THE TOOL ACROSS ALL
THE PUNCHING PINS.
IT IS ESSENTIAL THAT ONLY
SHARP PUNCHING TOOLS
BE OPERATED IN A
PUNCHING MACHINE
IMPORTANT!
