6 - FIRST POWER UP
7 - ENTRY IN PROGRAMMING MODE
• At first power up, the blue LED and the Buzzer works for 3s, then
the device switches into “Stand-by” with flashing blue LED.
• The entry of the default PIN
8 8 8 8 8 8
,then
#
enables the relay 1 for 5s (green LED fixed).
WARNING: from the registration of the first user, the default
PIN will no longer be active.
Chap.
Chap.
Chap.
Chap.
1
2
3
yellow LED
yellow LED
*
(you have 20s to type enter
the Master code)
Type the Master code
8 8 8 8 8 8
then
#
The device is in programming mode, proceed with the
required function:
Users Programming and Cancellation:
• Programming of a PIN code
or a Card/Tag
• Programming of Card/Tag
in succession
• Programming of Card/Tag + PIN
• User/s Cancellation
Advanced functions:
• Relay 1 configuration
• Relay 2 configuration
• Doorbell button configuration
• Keypad backlight
• Buzzer sound volume
• “Door open too long” alarm
• “Door forced” alarm
• Max. no. of wrong attempts alarm
• Anti-tampering alarm
• Back to factory parameters
Chap.
Chap.
Chap.
Chap.
Chap.
Chap.
Chap.
Chap.
Chap.
Chap.
10.1
10.2
10.3
10.4
10.5
11.1
11.2
11.3
11.4
12
.................................
.................................
.....................
........................................
.................................
.........................
.....................................
..............
.................................
........................
LED / Audible beep
Buttons
9.1
9.2
9.3
9.4
.............................................
.............................................
................
....................................
4
Blue LED
*
to exit from Programming
mode
(a)
(a)
Without any action, the device automatically exits from Programming
mode after 60 sec.
