KUDA
14
UK
Periodically check the gate structure, in particular:
- Check functioning of the hinges;
- Check that the leafs are correctly balanced. Excessive inclination of the leafs will result in faster wear of the
operator fastening brackets. Do the test by unlocking the operator and checking that the leafs do not move on their
own;
- Check good functioning of the safety devices;
- Unlock the operator and check that there are no points of friction along the entire travel;
- Check that there is no dirt or debris on the worm screw, and if so, clean and then lubricate the worm screw with
lubricating grease.
- Periodically check proper adjustment of the operator thrust force and the efficiency of the unlocking device for
manual operation (see the relative paragraph).
- The safety devices installed on the system must be checked every six months.
For any unresolved malfunction, cut the power to the
system
and
call
in
a
qualified
technician
(installer).
In
the
period
when
the
gate
is
out
of
service,
activate
the
manual
unlocking
device
to
allow
manual
opening
and
MAINTENANCE
MALFUNCTIONING
