14”
7
RUNNER REB-B
10 - Store or cancel one transmitter using a transmitter previously stored
Click-Clak
Click-Clak
P2
P
P2
P
P2
N/E
Click-Clak
• Giving a movement command or pushing the button to start a manoeuvre, the motor does not start.
a) Check if the thermic protection of the motor is taking place. In this case, to restore the normal operation, just wait for the motor to cool down.
b) Check that the "RADIO BLOCK" is disabled.
c) Check the battery status.
• If the motor does not automatically stop when the roller shutter (or the curtain) arrives to a limit switch.
a) During the manoeuvre, be sure that the roller tube drags the ring of the limit switch.
If after these checks the problems continue, address to a qualified technician, or call GiBiDi Technical Assistance.
• The first transmitter cannot be stored
a)
Repeat the procedure "Storage of the first transmitter";
b) Check that the "RADIO BLOCK" is disabled
• All the transmitters cannot be cancelled form the memory of the motor
a)
Be sure that the transmitter used to make the procedure «cancel all the transmitters» is stored
GUIDE TO PROBLEMS SOLUTIONS
Declaration of UE manufacturer:
The UE declaration of conformity is available at http://conformity.gibidi.com
GI.BI.DI. S.r.l. reserves the right to modify the technical data without prior notice, in relation to product development
Download instruction in English
Descarga instrucciones en Español
Téléchargements instructions en Français
UK
9e - Factory resetting
Click-Clak
Click-Clak
Click-Clak
Click-Clak
6
RUNNER REB-B
5 - Operation mode: Automantic or hold-to-run of the transmitter
Click-Clak
Click-Clak
5”
Automatic:
closes completely.
at every pressure of a button (ascent or descent), the motor opens or
Hold to run: at every pressure of a button (ascent or descent), the motor moves for
1 s. Holding down the button for more than 2 s, the motor moves in automatic
mode.
Click-Clak
6”
10”
UK
9 - Advanced functions of Prog button of motor header
9a - The header Prog button operates as Start with step by step with stop logic
operation in reply to Prog command:
closed curtain
opens
during opening
stops
closes
stops
open curtain
during closing
9b - Enables the Radio block
Click-Clak
Click-Clak
1”
9c - Desables the Radio block
Click-Clak
9d - Modification of the rotation direction
Click-Clak
Click-Clak
Click-Clak
9e - Store / cancel one transmitter
2”
proceed within 10 s, after
pushing the Prog button
Click-Clak
Click-Clak
2”
N/E
