04
05
【
POWER BUTTON
】
【
FILTERS LIFESPAN
】
Fan Speed
Filter Life Rate
Additions
Operation Tips
Buttons Instruction
Applications
Sleep Speed
Medium Speed
High Speed
Please make sure the adapter(DC 12V)of air purifier is compatible
with the socket.
Please make sure the plug is plugged in and tightly connected to
the power outlet.
Do not use if the power, plug or unit is damaged, or the product is
not working properly.
Do not touch the power cord with wet hands.
Warnings
1.Firstly plug the output
of the power adapter
into the connector on
the back of the
purifier.
2.Plug the other end of
the adapter into a
suitable power outlet
and the purifier goes
into standby.
3.Tap the power
button to turn on
the purifier.
4.Purifier works
normally.
Office Table
Reading Room
Hotel Room
Baby Room
On/Off
a
.When the power supply DC 12V is connected, the On/Off indicator lights red and the purifier
enters the standby state.
b
.In the standby state, touch the On/Off indicator lights white, the product enters the working
state, and the fan runs at the default intermediate speed.
c
.In the working state, touch the On/Off, the fan will cycle between medium speed, high speed,
shutdown (shutdown can be delayed for 100ms), and low speed. The speed level indicator light
is displayed accordingly.
d
.When it is adjusted to the sleep level(low speed), the light is turned off after 5 seconds, and the
key light is turned off to enter sleep mode. The fan runs at a low speed. After entering the sleep
mode, touch the key to wake up the sleep mode, and continue to enter the sleep mode when
there is no shift position within 5 seconds.
a
.High-speed 1 hour for 0.5 hour calculation, mid-speed 1 hour for 1 hour calculation, low-speed
2 hours for 1 hour calculation, when the filter life time limit is ≥95% hour, the power button lights
in red and flash twice per second, until the lifespan reset. If not reset after the lifespan used up,
the power button lights in blue and flash flash twice per second, until the lifespan reset.
-0.50
-1.00
-1.50
Reduce 1 hour per 2 hours running
Reduce 1 hour per 1 hour running
Reduce 1 hour per 0.75 hours running
c
.If reset is required, press On/Off for more than 5 seconds in the first 5 seconds after power-on
of standby state. The On/Off LED flashes for six times(Twice one second), it is resettled.
b
.Filter life reset: When the filter life reaches the limit of 95%, On/Off button flash in red after
power on for 1 min(regardless of the speed). When reaches 100%, the red and white lights will
be on for a long time 1 min after press the On/Off. Long press On/Off for more than 5 seconds
in the power on state, red light flashes 6 times (twice per second) to complete reset.
