5
MICROCLEAN (Part. N
o
. 36-180-2101)
FUNCTION
MICROCLEAN can easily be fitted to the wall or placed on a workbench.
It is designed for manual cleaning using a spray gun.
The liquid is recycled automatically and cleaned using sedimentation.
Ventilation hose is available as an accessory.
MICROCLEAN has:
•
A well designed ventilation system that is effective for manual cleaning.
•
The ventilating cover is easy to connect to existing ventilation system.
•
A spray gun that is easy to grip and manoeuvre.
•
The electrical system is totally insulated from the liquid.
•
Closed off workspace preventing the liquid from leaking.
INSTALLATION
Assembly instructions
1. Mount the cleaner on a wall or place it on a workbench
(when placing it on a workbench, pull out the adjustable legs).
2. Make sure that the sedimentation plate is in place in the sedimentation tank.
3. Put the unloading plate, with the open slots to the left, on top of the
sedimentation tank.
4. Mount the connection to ventilation system on the right side of the cleaner
with the enclosed screws.
5. Fill the tank with 8 litres of liquid, low aromatic degreaser with flash-point
above 70° C. The liquid must not exceed the inner unloading plate.
6. Connect the cleaner to a 230V/50Hz earthed socket. The input plug should
be easy to reach, when the cleaner is in use.
•
Do not mix the liquid with for example gasoline, thinner, acetone or similar.
•
Do not place the cleaner in rooms where volatile solvents or inflammable
gases are stored or used. This may cause an explosion!
•
Do not place the cleaner in wet or humid rooms. This may cause flashover!
5
Summary of Contents for Microclean
Page 16: ......
