How to change the pump gasket
1. Unplug the machine from the power supply!
2. Empty the liquid, see: 'How to change the liquid'.
3. Unscrew the front plate and loosen the hose clip.
4. Loosen the two screws underneath the ground plate and lift up the pump.
5. Loosen the pump block and unscrew the pump wheel.
6. Change the gasket and put the pump together again.
7. Mount the pump, attach the hose and put the hose clip back on.
8. Refill the tank. See: 'How to change the fluid.
How to change of pump
1. Unplug the machine from the power supply!
2. Empty the liquid, see: 'How to change the fluid’.
3. Unscrew the front-plate and loosen the hose clip.
4. Loosen the two screws underneath the ground plate and lift up the pump.
5. Mount the new pump, attach the hose and put the hose clip back on.
6. Refill the tank. See: 'How to change the Fluid.
How to change the power cord
Work on electrical equipment must be performed by
skilled personnel
only.
Spare parts and accessories can be ordered from your supplier.
SPARE PARTS
38-100-0001
Brush
38-110-0001
Pump
38-102-0001
Pump gasket
38-103-0001
Net strainer
38-105-0001
Spray gun with hose
38-107-0001
Main switch
ACCESSORIES
36-190-0001
Ventilations hose
TECHNICAL SPECIFICATION
Spray gun with hose
1 st
Tank
volume
8
litre
Pump
capacity/min
28
litre
Max wash weight
20kg
Cleaning area WxDxH
515x170x335 mm
Cleaning table, WxD
515x340 mm
Outside dimensions, WxDxH
590x250x625 mm
Net
strainer
1
st
Voltage supply
230V/50Hz 1fas.
Pump
effect
85W
Weight
24kg
Fluid
Low
aromatic degreaser with
Flash point
above
70°C
7
7
Summary of Contents for Microclean
Page 16: ......
