8
MAXICLEAN
(Part. N
o
. 36-181-2101)
FUNCTION
MAXICLEAN has two cleaning systems, which can be used separately or integrated.
The parts can be cleaned either in a closed area, where the liquid is automatically
sprayed on the part by three nozzles or placed on a wash board and cleaned manually
with a spray-gun.
The fluid is recycled automatically and cleaned using sedimentation. Ventilation hose
and castors are available as accessories.
MAXICLEAN has:
A well designed ventilation system. The ventilating cover is easy to connect to existing
ventilation system.
•
A spray gun that is easy to grip and manoeuvre.
•
The electrical system is totally insulated from the liquid.
•
Closed off workspace preventing the liquid from leaking.
INSTALLATION
Assembly instructions
1. Lay the cleaner on its back. Mount the castors using the enclosed screws, two for
each castor.
2. Make sure that the sedimentation box is located on the left hand side of the liquid
tank.
3. Put the unloading plate, with the open slots to the left and the gripping edge
backwards.
4. Mount the protection hood using the enclosed screws.
5. Mount the connection of the ventilation system on to the protective hood using the
enclosed screws.
6. Fill the tank with 30 litres of fluid, low aromatic degreaser with flash point above
70°C. The liquid must not exceed the inner unloading plate.
7. Connect the cleaner to a 230V/50Hz earthed socket. The input plug should be easy
to reach, when the cleaner is in use.
•
Do
not
mix the liquid with for example petrol, thinner, acetone or similar.
•
Do
not
place the cleaner in rooms where volatile solvents or inflammable gases are
stored or used.
This may cause an explosion!
8
Summary of Contents for Microclean
Page 16: ......
