HARDWARE CONTENTS
(shown actual size)
WARNING
This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep
combustible materials, such as furniture, pillows, bedding, papers,
clothes, curtains, etc. at least
90 cm/3 ft from the front of the heater and keep them away from the sides and rear.
Proper ventilation is required when operating this fireplace. NEVER cover this device with
anything that could restrict air circulation to or from the unit.
To prevent a possible fire, DO NOT install or use this fireplace directly on carpet, beds, or
similar soft surfaces as this may block air intakes, exhaust outlets or otherwise restrict air
circulation beneath the heater.
clothes, curtains,
etc. at least
and whenever the heater is left operating and unattended.
NEVER leave this fireplace unattended when in use.
!
When using electrical appliances, basic precautions should always be followed to reduce the risk
of fire, electric shock, and injury to persons, including the following:
Read all instructions before installing or using this heater.
To avoid malfunction, please be certain the input voltage of the electric fireplace insert and the
voltage of the outlet are identical before plugging in.
Check the unit for any damage that may exist (such as missing screw, dents, etc.) before using
this device.
When first used, the electric fireplace insert may emit a slight odour. This is normal and
harmless and will go away after the first few uses.
The outlet must be 15A/120V.
DO NOT touch the vent when heater is turned on.
product is very heavy. It is recommended that at least two people work together to
assemble it.
fireplace during assembly.
IMPORTANT INSTRUCTION
!
Heater
Vent
Do not
touch
Bolt
Spring washer
Flat washer
Allen wrench
Bracket
AA
BB
CC
DD
JJ
FF
GG
HH
II
3