Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents.
Tools Required for Assembly (not included) : Phillips screwdriver
Always unplug this fireplace when not in use. Turn off all controls prior to removing the plug
from the power source.
This fireplace is designed for indoor use only. NEVER use this device outdoors.
Connect this fireplace only to properly grounded outlets.
Make sure plug is fully inserted into the electrical outlet to avoid fire caused by short circuit.
Use caution and do not strike the mesh on this fireplace.
NEVER use this device in bathrooms, laundry areas, or similar locations where it may come
into contact with water.
Avoid placing the power cord in high traffic areas where it could become damaged or be a trip
hazard.
DO NOT run the power cord under carpeting, furniture, or appliances.
NEVER cover the power cord with throw rugs, runners, or similar coverings.
DO NOT operate this device with a damaged power cord or plug.
DO NOT operate this device if the cord becomes damaged, after the unit malfunctions in any
way, has been dropped, or becomes damaged in any manner. If this happens, discard the unit
or return to an authorized service facility for inspection and/or repair.
DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may
cause an electric shock, fire, or damage to this fireplace.
areas where gasoline, paint, or other flammable liquids are used or stored.
relocatable power tap (outlet power strip)
any cleaning or maintenance.
its power cord in a dry place and free from excessive vibration.
recommended by the manufacturer may cause fire, electric shock, injury to persons, and/or
damage to property.
Do not operate any heater after it malfunctions. Disconnect power at service panel and have
heater inspected by a reputable electrician before reusing.
To disconnect heater, turn controls to off, and turn off power to heater circuit at main
disconnect panel.
To prevent a possible fire, do not block air intakes or exhaust in any manner.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may
cause an electric shock or fire, or damage the heater.
SAVE THESE INSTRUCTIONS
4
