6
The user can set the GCAN-203's name and connection password. GCAN-203's
default name is SN number, password is 1234.
3.5 End of configuration
Click "Download" to write the configuration data to the converter's flash, as shown in
figure 3.6.
Figure 3.6 Download successful
The pop-up dialog displays "download Param success". Then power-on again. The
new configuration can take effect.
Note: The converter must be power-on again, otherwise the configuration will
not take effect.
3.6 Save the configuration file
Click “SaveAs” to save the configuration parameters to the PC. The file can be
opened again.
3.7 Open the configuration file
Use the “OPEN” function to open the configuration file and modify it. Then you can
click DownLoad to the converter that the new configuration can be saved.
Note: The working mode of “BlueTooth Test” and “CAN Test” is used for testing .
These functions cannot be used.
