10
Shenyang Guangcheng Technology Co., Ltd.
Industrial-grade WiFi-CAN converter-GCAN-211
Product data sheet
“Enable DHCP”-whether to use DHCP
“Wifi SSID”-set the name of the WiFi, default: CANWIFI-II
“Key Type”-set the encryption mode(WPA2 is recommended)
“Key”-set the password for WIFI
“Wifi Mode”-set the WiFi mode of operation
“Connect AP SSID”-in the client mode, the name of the AP to be connected
“Connect AP Key”-in the Client mode, the password of the AP to be connected
“Data Mode”-set the data transfer format, with 13 bytes of data and 20 bytes of
data
Note: When the communication to determine the wireless network card IP and
device IP in the same network segment.
4.2.2 CAN-Bus parameter setting
Click "CAN1 / CAN2 Info" to enter the CAN-Bus parameter setting interface.
"TCP Port" - set the CAN-Bus communication port
"CAN Baud" - sets the CAN-Bus communication baud rate
"CAN Mode" - set the CAN-Bus operating mode
"CAN Filter" - not open, the default is set to 0
"TCP Mode" - set the TCP operating mode
"Remote IP" - set the destination host IP address
"Remote Port" - set the port number of the destination host
Note: "Remote IP", "Remote Port" is valid only in TCP Client mode and
UDP mode.
4.3 Finish the configuration
When the configuration is complete, click "DownLoad" to download the
