Vhandy technology
GCAN-2008 user manual
1. Introduction
1.1 Overview
The GC-2008 module has integrated 8 digital output channels, which acquires
digital signals in real-time and transmits them to the GCAN-PLC coupler. This
module can be used with any other GC Series IO module to capture and process
digital data in industrial automation or distributed control systems.
1.2 Properties at a glance
●
8 output channels
●
Nominal voltage: 24V DC(±20%)
●
Load types are resistive load, inductive load, lamp load;
●
Maximum output current:500mA
●
Electrical isolation: 500 V(GC-bus)
●
Current consumption:120mA
●
The bit width output in the process image is 1byte
●
No address setting, configuration via bus coupler or controller
●
Operating temperature: -40°C ~+85°C
●
Size: 100mm*69mm*12mm
1.3 Typical application
●
According to the bus coupler or controller output digital signal.
