Guangcheng Technology
GC-4602 user manual
2. Installation and use of equipment
This chapter will explain in detail the installation method of the GC-4602
module, the wiring method, the meaning of the indicator light and the meaning
of the interface.
2.1 Module fixed
The installation method of GC-4602 module is shown in Figure 2.1. You need
to use a flat-blade screwdriver to assist in installation.
Figure 2.1 GC-4602 Module installation
First you need to install the fieldbus coupler on the rail, then attach the GC-
4602 module to the right of the fieldbus coupler or other module to add the
component. Insert the GC-4602 module inward along the slot as shown in
figure 2.1 until the latch is stuck.
The GC-4602 module is powered by GC-bus without additional power
supply. You only need to connect the power to the bus coupler and connect the
GC-4602 to the module composed of the bus coupler to realize the power
supply of the GC-4602.
2.2 Wiring method
As shown in Figure 2.2, first insert a flat-blade screwdriver into the square hole
and hold the screw in the square hole. Then insert the cable into the circular
hole. After plugging it in, pull out the screwdriver and the cable can be firmly
