4
Shenyang Guangcheng Technology Co., Ltd.
CANopen bus coupler
—
GCAN-IO-8000
Product data sheet
Shenyang Guangcheng Technology CO.LTD.
1. Function introduction
1.1 Functional Overview
GCAN-IO-8000 CANopen bus coupler can be used to connect CAN bus system and
distributed bus terminal modules. These terminal modules can be expanded in a
modular manner. A complete node consists of a bus coupler, 1-32 any number of
terminal modules and a terminal terminal module. Adopt GCAN-IO-8000 bus coupler,
through GC-bus expansion technology, can establish I/O connection very
conveniently, can connect up to 32 input/output terminal modules.
GCAN-IO-8000 CANopen bus coupler adopts CAN bus protocol that conforms to
ISO 11898 standard. The GCAN-IO-8000 bus coupler not only supports all types of
CANopen communication, but can also be easily applied to manufacturer-specific
CAN bus environments. In addition, the firmware can be upgraded through the
configuration interface.
GCAN-IO-8000 bus coupler can connect all bus terminal modules. As far as the user
is concerned, the processing of analog input/output signals is no different from the
processing of other types of signals. The information in the process image area of the
controller is displayed in byte array format. According to different models, the analog
bus terminal module register contains the temperature range, gain value and linearized
characteristic curve.
GCAN-IO-8000 bus coupler supports automatic configuration, you do not need to set
parameters on the PC. The CANopen baud rate of the GCAN-IO-8000 bus coupler
can be configured via the RS-232 interface.
1.2 Performance characteristics
CANopen baud rate supports 1000k, 500k, 250k, 125k, 100k, 50k, 10k;
PDO mode supports synchronization, loop, event-driven, and polling;
The number of bus terminal modules is 32;
Send 12 PDO (CANopen), receive 12 PDO (CANopen);
The configuration mode is automatic configuration;
The CAN bus interface is an open 4-pin terminal;
The power supply adopts 24V DC (-15%/+20%);
The input current is 70mA+ (total GC-bus current), the maximum is 2.5A;
Starting current: about 2.5 times the continuous current;
Power supply: Max 24V DC/Max 10A;
The electrical isolation is 1500 Vrms;
Working temperature range: -40
℃
~+85
℃
;
Dimensions: length 100mm * width 69mm * height 48mm.
