AR-24 User Manual
Blade Specification A-2
Blade Specification
202003480G
For cutting thick fluorescent and reflective vinyl. Also for cutting
detailed work in standard vinyl.
The blade is 45° with
Red Cap
(5-unit package), 0.25 mm offset,
and 2.5 mm blade diameter.
290088080G
For cutting reflective vinyl, cardboard, sandblast, flock, and
stencil sharp edge.
The blade is 60° with
Green Cap
(2-unit package), 0.50 mm
blade offset, and 2.5 mm blade diameter.
265017550G
For cutting thin sandblast mask and stencil. The blade with
sharp angle and special design, allowing it to maneuver around
sharp corners.
The blade is 60° with
Blue Cap
, 0.25 mm blade offset, and 2.5
mm blade diameter.
265017560G
For Cutting small text and fine detail. Sharp blade with smallest
offset.
The blade is 50° with Black Cap, 0.175 mm blade offset, and 2.5
mm blade diameter.
265017530G
For thin and delicate media such as window tint.
The blade is 25° with
Yellow Cap
, 0.25 mm blade offset, and
2.5 mm blade diameter.
