www.GCCworld.com LABEL EXPRESS / DECAL EXPRESS User Manual
76
Pen parameters
SmartCONTROL
TM
provides 16 color pens, and each pen presents laser parameter
setting, once colors are set, the pen would refer to the specified parameters when you
apply the colors to an output. Pen Parameters under Processed Condition Setup would
enable you to adjust the power, speed of each color pen.
(1) Choose a color pen
(2) Adjust the bar next to speed, power and PPI for the chosen color pen.
Remark:
1. Speed
The speed is calculated by percentage, which means some percentage of the max. speed
of the indicated laser label cutter.
2. Power
The power is calculated by percentage, which means some percentage of the max laser
power that the indicated laser label cutter has.
3. PPI
PPI (pulses-per-inch) represents the number of times the laser pulses (fires) per linear
inch, exclusive for vector cutting. Higher PPI settings will generate deeper, overlapping
laser pulses, resulting in cleaner cuts. Lower PPI settings (lower than 150) will result in
the individual laser pulses being spread apart, resulting in a perforated effect (similar to
1
2
3
4
5
