www.GCCworld.com LABEL EXPRESS / DECAL EXPRESS User Manual
87
- Save Marks
Save the marks which are learned.
- Load Marks
Load the marks which are saved.
Counter
- Row(s)
Define the number of rows will be cut each job.
- Repeat
Define the times the laser system to output the same job.
Direct Cut
Cut the selected graphic directly. The position where the cartridge is will be the
start point for cutting and marks learning will not be performed.
5.3.4 Calibrating SmartCONTROL
TM
Label
Calibration function is to calibrate the shift and angle variation caused by printing or
media loading. Perform the calibration to ensure the cutting accuracy.
1) Load the printed roll media onto LABELEXPRESS/DECALEXPRESS.
2) Launch SmartCONTROL
TM
and Click "Vision" on the menu and select
“SmartCONTROL Label” from pull-down menu.
3) Move the laser carriage to blank area.