72
7a.
If using LPR:
Under “Protocol,” select the
radio button next to “LPR.”
Under “LPR Settings,” set the Queue Name
as follows:
For the Elite 21 printers, enter “Elite” as
the Queue Name.
Click on the checkbox next to “LPR Byte
Counting Enabled.” to enable byte
counting.
Do not make any other entries or changes
in this window. Click OK to return to the
Additional Port Information window, then
click Next to proceed.
8.
This will complete the TCP/IP Printer Port
Wizard. A window will appear
summarizing the settings that have been
made for the new port. Click Finish.
