• 11 - 7
3.
Grasp the jammed paper with both hands and slowly remove it from the
fuser unit by pulling in the direction that the paper normally takes. If the
sheet tears, make sure you remove all the pieces.
4.
Discard the jammed paper.
5.
Close the rear cover of the fuser unit and close the fuser cover.
Clearing a paper jam
1.
Open the top cover of the printer.
2.
Locate the jammed paper. If the message says Paper feed jam, open the
paper tray; if the message says Paper path jam, remove the toner car-
tridge.
3.
Grasp the jammed paper with both hands and slowly remove it from the
printer by pulling in the direction that the paper normally takes. If the
sheet tears, make sure you remove all the pieces.
4.
Discard the jammed paper. If the jam happened at the paper tray, be sure
that all the paper is beneath the metal bracket at the left front of the
paper tray.
5.
Check the list below: “Paper Jam Checklist.”
Summary of Contents for Elite XL 20ppm
Page 1: ...USER S MANUAL GCC TECHNOLOGIES EliteTM XL20ppm ...
Page 168: ...A 5 G H F Skew 2 0mm 0 0787in E 2 0mm 0 0787in E F G H 245mm Paper feed direction ...
Page 172: ...A 9 Squareness 1 3mm 0 0512in J 1 3mm 0 0512in K L M 210mm M L Paper feed direction K J 90 ...
Page 187: ...D 3 On Line Comm Paper Servic e ...
