Expert 24 User Manual
Installation 2-8
CAUTION!
!!
Make sure the Primary and secondary pinch rollers are set to right positions.
Position the Primary Pinch Rollers at the right and left sides of media.
Position the Secondary Pinch Roller at the center of media.
Figure 2-17
Primary Pinch Roller
Secondary Pinch Roller
(X)
Incorrect
(O)
Correct
Figure 2-18
Step 4
Push the lever backward to lower down the pinch rollers (Figure 2-15).
Step 5
After turn on the power, the tool carriage will measure the size of the media automatically. And
the plotting cutter begins to work.
