![background image](http://html1.mh-extra.com/html/gcc-technologies/j5-series/j5-series_maintenance-manual_3901950056.webp)
Version : 9.0
56
16. Media drops sometimes
.
Causation and to recovery:
a. Media is loaded askew. (Re-load the media.)
b. The position of pinch roller is not on the top of drum. (Move the pinch roller to a right position.)
c. The edge of media is broken. (Change the media.)
d. The front of media is not even. (Cut the front edge of the media evenly and reload the media.)
e. Drum is coated with paper chips or dust. (Clean the surface of drum.)
f. Drum or pinch roller is worn. (Change the drum set or pinch roller.)
5.3 Firmware update
Normally, before a new machine or spare main board is ready to ship, a loader or even a firmware
will be uploaded first on it. In case of functionaility problem happening due to incorrect firmware
version, please verify if the existing firmware on this main board is the desired one. A program
called ‘Firmware Uploader’ is a tool for users to easily upgrade firmwares, followed by the steps
listed below :
Step1: Power off machine
Step2: Press and hold “
▼”
key, then power on machine. Please hold
“▼”
key until LCM shows
“Boot loader in Commom USB script”
Summary of Contents for J5 Series
