LaserPro StellarMark CIIA-Li User Manual | 9
partially-reflect some of the invisible laser radiation. Severe eye damage may
occur if appropriate safety goggles are not worn.
z
Connect the machine to a properly grounded power outlet. Ensure the voltage of
the power source is identical to the voltage of the machine.
z
Do not attempt to modify or disassemble the laser module.
z
Do not attempt to remove or modify any component of the machine’s laser
interlock safety system.
z
Ensure the immediate work area of the machine is well-ventilated. Odors, vapors,
and dust are byproducts generated during the laser marking and cutting process.
An exhaust system is recommended. Please contact GCC or your local GCC
distributor for more information.
z
Do not laser heat-sensitive surfaces or materials that may generate toxic fumes,
such as PVC and Teflon.
z
Regularly clean and maintain your machine according to our cleaning and
maintenance instructions. Doing so will ensure a machine that will operate
effectively and safely over a long period of time.
1.6 Operating Environment
Please follow the guidelines when considering a suitable location to set the LaserPro
StellarMark CIIA-Li. Improper work environments may lead to operational malfunction
and/or unsafe working conditions.
The LaserPro StellarMark CIIA-Li should be placed and operated in a clean
environment, avoid places where the machine is exposed to high temperatures, dust,
or high humidity
NOTE
Each LaserPro laser machine is shipped with a single pair of safety goggles.
If additional safety goggles are required, please contact GCC directly or an
authorized GCC distributor. If you wish to purchase one on your own, please
make sure the safety goggles meet these requirements:
190 - 398 nm OD5+
10,600 nm OD5+
Visible Light Transmission: 92.9%
Summary of Contents for LaserPro StellarMark CIIA-Li
